Safety Tips

Electrical Safety Tips for your home 

  • Don't overload your sockets - that includes extension leads. If you find you are regularly using extension leads, consider getting more sockets installed in your home. 

  • Check the current rating of an electrical adaptor before you plug appliances in - make sure that the total curernt used does not exceed the adaptor's rating.

  • Regularly inspect appliances, fittings, cords and sockets for damage. Check that the leads, plugs and the appliance itself are in good condition.
  • Switch off appliances that are not being used.
  • Always use a registered electrician for electrical installations.
  • Don't DIY.
  • Get electrical installations in your home checked every 5-10 years, this should also be done if you have purchased a new home. 
  • Check your smoke alarms regularly.

How old is your wiring?

Faulty and aging wiring is one of the major causes of electrical fires in the home. However, there are some clear signs to help you tell the age of your wiring in your home. These are:

  • Cables coated in black rubber - this was phased out in the 1960s;
  • Cables coated in lead or fabric - pre 1960;
  • A fusebox with a wooden back, cast iron switches, or a haphazard mixture of fuse boxes - pre 1960;
  • Older round pin sockets and round light switches, brown and black sockets mounted in the skirting board - pre 1960; and 
  • Wall mounted light switches in bathrooms - pre 1960.